NVIDIA Hybrid SLI
"Hybrid SLI will be implemented on notebooks initially and then later into desktops."
Published: 26th June 2007 | Source: VR-Zone |
NVIDIA Hybrid SLI For Notebooks First Then Desktop
| ...Our sources told us that Hybrid SLI will be implemented on notebooks initially and later into desktop. In battery mode, the integrated graphics will work only but when plug in, the discrete graphics will kick in and work together with the integrated graphics to improve performance. Hybrid SLI will compete against the AMD Power XPress technology and will arrive at least a quarter earlier. It seems Hybrid SLI is a notch better than Power Xpress since for the latter, only discrete graphics will work while integrated graphics is left to idle. Perhaps AMD will counter back with a Hybrid Crossfire solution. HKEPC mentioned that future integrated GeForce motherboard and discrete GPUs will collaborate to enhance capabilities, performance, as well as reduce power. Depending on the processing demands of each application, the discrete GPU may be completely shutdown to save power or power up to deliver maximum performance. |
Discuss in our forum
Most Recent Comments
Watercooling that GFX card would dump alot of hear into your loop tho.. So i dno wether its necessary unless you can afford 2 loops.. I might be wrong.. haha.. im still abit of a n00b myself.
I will be getting a 8800gt sometime tho
I wont be incorporating it all in one go as i dont think i could afford so much!
Probably CPU only first off, possibly northbridge too - GPU later on
I wont be incorporating it all in one go as i dont think i could afford so much!
Probably CPU only first off, possibly northbridge too - GPU later on
Well i got all my stuff second hand from Bio-Hazzard(sbherm) and its all alphacool and it works great, my C2D (stock) idles around 27-29 and loads around 34-36.. Pretty good temps.
Well i got all my stuff second hand from Bio-Hazzard(sbherm) and its all alphacool and it works great, my C2D (stock) idles around 27-29 and loads around 34-36.. Pretty good temps.
Just as a comparison - my C2D idles at around 21°C and loads at 33-34°C stock on my setup :)
Cool... they really are good temps.. What set-up u using?? my house is quite warm tho..
Mine idles at 42 (at 2.7ghz) and loads at about 55 :o
Cool... they really are good temps.. What set-up u using?? my house is quite warm tho..
This one here
Apogee GT
D5 pump
XSPC Bay res
Evo 360 Rad
Cool. But i bet mine cost half as much as yours :)
there are custom kits already made at Petrastechshop , its based in the US, there shipping prices are more than reasonable and service beyond measure. h/e if you can get your stuff at ST, it would probably be better
CSS Valid
Plus the noise....ughhhh