Super Talent announces Project X DDR3-2000 2GB kit

"Super Talent have announced the immediate release of their new Project X DDR3-2000 2GB memory kit"

Search News

  • Scrolling Image
 Project X DDR 3
Super Talent release supercharged Project X DDR3-2000 memory kit

Super Talent Technology have announced with immediate effect the release of the latest addition to their popular Project X line of super fast DDR3 memory.  The new 2GB (2 x 1GB) kit runs at storming speeds of DDR3-2000 with timings of 9-9-9-28 at 1.9v.
This Project X kit is built with the fastest available, carefully screened DRAM chips, and is hand tested as a matched pair on a dual channel Asus Striker II Extreme motherboard.

“Countless enthusiasts worldwide have already exceeded the 2000MHz mark with our Project X 1600 and 1800 kits over the past seven months. This new 2000 kit offers overclocking gurus a product that has passed our tightest test screen and packs some real serious horsepower”, commented Super Talent Marketing Director, Joe James.

Super Talent say that Project X represents the most advanced DDR3 memory available.  It is developed in Super Talent’s Silicon Valley Engineering Labs to deliver the highest attainable DDR3 memory performance.  After development it is then designed, built and tested in Super Talent's San Jose, California headquarters.
Project X also employs an effective looking cooling solution that offers double the surface area and 106% more aluminium mass than standard heat spreaders.  Super Talent say that this heat-spreader coupled with their special thermal adhesive  provides superior heat dissipation resulting in a cooler, faster memory device.

This memory is backed by a lifetime warranty and goes by the model number of W2000UX2GP.  The memory is shipping immediately so it should start turning up on the virtual shelves soon and will set you back a not so small sum of just under $400.
Click here for full product details.
Tempted by DDR3 yet with these seriously fast kits hitting the market? Or is it still just too expensive to be considered at the moment.
Let us know your thoughts in our forum.
«Prev 1 Next»

Most Recent Comments

07-04-2008, 22:26:08

Heres what Ive got so far. Am I missing something? Some little odds or ends? I will be cooling an 8800 GTX, and at this point in time Q6600, which will very shortly turn into an E8400 once Im done benching it

I was all ready to do this about 3-4 months ago, and then someone convinced me to go subzero instead Im back to finish up what I planned on starting. I am planning on making a custom WC loop that is as quiet as possible.

CPU : D-tek FuZion, Nozzle Accelerator Kit, Pro Mount Kit for FuZion

GPU : Swifttech MCW60-R + swifttech ramsinks

Rad : PA 120.3 + shroud

Fans : Antech tricool 120mm X 3. Can I use these fans? I got a killer deal at Microcenter $1.99 each and I loaded up with like a dozen If these are going to be too loud or some other issue I can get different ones without much of an issue.

Pump : Swifftech MCP655 vario

Tubing : Clearflex 1/2 ID, 3/4 OD - 25 feet. Yea more than I need, but its cheap and I always like extra pieces in case of mistakes, or future uses. Ill prob actually bump this up to 30-35 ft in case I plan on changing something on the fly later too.

Clamps : What do you think? "worm-clamps" or some of the fancy plastic clamp clips I see at petras, jab-tech, sidewinder, etc...?

Res or T-line or Fill-port: Which one and why? Im not really sure what would be easiest? One of those DD fill-ports looks about as simple and easy as possible and Im leaning towards that.

Do I need any special additives for the liquid? Any special cleaners for the parts when they arrive new?

Mounting the rad......Im having trouble visualizing this. I have one of those HUGE rocketfish cases from BB that I was planning to use, so I was going to mount the rad INSIDE of the case. I know I will need to cut some holes in the top to mod the case, and Im ok with that. If I mount INSIDE the case do I still need a shroud? How will I mount the rad? Just rig it with some screws, or nuts/bolts, or does it come with mounting equipment?

Do I need any different/extra nozzles for the rad?

Also, do I lose any cooling capacity by mounting the rad inside of the case as opposed to outside? How much louder would it be mounted outside of the case?

Its alot of questions I know But Id really appreciate any input and thx in advance

08-04-2008, 03:51:57

I always use wormdrive clips as they are easier to remove matey...
How about a res with a fill port? Easier to fill that way, I personaly dont like just a T-line idea.
If you buy premixed coolant like feser then you dont need any additives as they are already in there.
If you mount the rad inside why not bolt the rad to the case and have the fans and shroud on the back of the rad? Fans sucking through rads on thermochills are roumored to give better results and quiter operation too so you may want to plan around this.
Extra nozzels? Only if you plan on changing the hose size matey?
You may hear the fans more if its external. And the air will be cooler outside of your case. But to be honest just plan what works best for your case, dont go making it too complicated, I prefer a good looking PC for the sake of a degree or 2.

08-04-2008, 04:36:29


Do I need any special additives for the liquid? Any special cleaners for the parts when they arrive new?

Just use Feser1 liquid, will have all you need in it already. When you receive your radiator it is advisable to fill it with either white vinegar or boiling water a few times to clean it, which depends on the radiator.

Rig the radiator as best suits your case, post pics up if youre unsure, use the same size barbs for the radiator as the rest of the system and yes you will lose some cooling capacity by mounting the rad in the case as you will be pumping slightly warmed air through it as opposed to air at room temp.

Register for the OC3D Newsletter

Subscribing to the OC3D newsletter will keep you up-to-date on the latest technology reviews, competitions and goings-on at Overclock3D. We won't share your email address with ANYONE, and we will only email you with updates on site news, reviews, and competitions and you can unsubscribe easily at any time.

Simply enter your name and email address into the box below and be sure to click on the links in the confirmation emails that will arrive in your e-mail shortly after to complete the registration.

If you run into any problems, just drop us a message on the forums.