Aqua-PCs Mini Competition
"The competition to celebrate Aqua-PC's arrival at OC3D has now finished...congratulations winners. Why not try your hand at Aqua-PCs new mini competition. Please see within..."
Published: 2nd October 2007 | Source: OC3D Forum |
Aqua-PC's
Aqua-PC's are a UK retailer selling a wide selection of water cooling supplies, and they also offer various case modding services, including laser cutting and power coating...including their own brand of water cooling - Flow.
Not only do they sell some luscious gear, but they also have their support forum at OC3D which is definitely reassuring. You can access Aqua-PCs support forum here
Check out their website Here and have a look at all they have to offer.
Introductory Competition: Now Finished
| A Full XSPC Watercooling Kit | A Coolermaster Elite Case | 5 X Flow Springs |
| | | .jpg) |
Congratulations to our winners:
Yeungster - XSPC water cooling kit;
WinMXer - CoolerMaster Elite Case and
Shaolin95 - Flow Springz
Comiserations to those who entered the competition and didn't win...better luck next time. In fact why not try your hand at Aqua-PCs Banner Design mini competition.
You can find out all the information required to enter the competition by heading over to Aqua-PCs support forum here
Most Recent Comments
I can now confirm that we have the following:
Freezone CPU Cooler
Eliminator CPU Cooler
Ram Fan Cooler
PCI Cooling Booster
USB Beverage Chiller
Being fedex'd to us as we speak - we will have these in for testing next week, if all the unit meets our quality control and tests then we will be putting them in to stock at the end of the week :):p we have also insured the OC3D get Priorty review items so they can test these to :)
Freezone CPU Cooler
Eliminator CPU Cooler
Ram Fan Cooler
PCI Cooling Booster
USB Beverage Chiller
Being fedex'd to us as we speak - we will have these in for testing next week, if all the unit meets our quality control and tests then we will be putting them in to stock at the end of the week :):p we have also insured the OC3D get Priorty review items so they can test these to :)
I can now confirm that we have the following:
Freezone CPU Cooler
Eliminator CPU Cooler
Ram Fan Cooler
PCI Cooling Booster
USB Beverage Chiller
Being fedex'd to us as we speak - we will have these in for testing next week, if all the unit meets our quality control and tests then we will be putting them in to stock at the end of the week :):p we have also insured the OC3D get Priorty review items so they can test these to :)
Can you get me a new mounting kit - if I give you the correct part letter?
Sean
Should be no problem if you can get me the part number asap might even get it out tomorrow with the testing pack :p
Should be no problem if you can get me the part number asap might even get it out tomorrow with the testing pack :p
You know that thing that happens when when you loose something, can't find it anywhere and then eventually give up and stop looking....
I found it
Sean
no worries - i got them to throw one in just incase anyway tho ;)
[IMG]http://upload.overclock3d.net/get.php?id=3798[/IMG]
:rolleyes: :D
:rolleyes: :D
:rolleyes: :D
Hey thats the freezone elite isnt it!
Coolits rock, I am running a 1.56 volt to my cpu for OC testing and I am keeping the cpu at 56 degrees under load now. Thats alot of cooling for that amount of heat.
My thermal AS5 seated finally and shwoop! down went the temps. I ran prime 95 3 hours small ftts and it reached a max of 56 degrees on 2 and 48 on the others. Held just fine.
Looking forward to your results remember to give it a little bit for the thermal to cook. Keep us posted!!!
I havent been able to get an Elite just yet thats the bog standard Freezone and eliminator in the pics :D
I do like the build quality of the stuff - very well made.
I do like the build quality of the stuff - very well made.
I havent been able to get an Elite just yet thats the bog standard Freezone and eliminator in the pics :D
I do like the build quality of the stuff - very well made.
Your going to love the stuff! I fiddle with mine and it rocks as well as theres a ton of different ways to do fan configurations in a case to make it more effective. Its not limited to "as it sits" It can be adjusted with case fans as well to lower temps.
Put it up and lets see some pics!!!! BTW nice site water boy!!! Very cool! No pun intended!:D
CSS Valid
Would that help. The only problem - and one I haven't got around to fixing is that its missing one of the CPU mounting kits - the one for the C2D that I put in a safe place and never found again...
Sean