ASUS Sabertooth Z97 Mark S Sabranco Preview

ASUS TUF Sabertooth Z97 Mark S Preview

ASUS TUF Sabertooth Z97 Mark S Preview

Codename Sabranco

The Sabertooth range of ASUS motherboards has a strong place in our hearts here at OC3D. Whether it's the original X58 one, or even the latest ones, the whole range is an amazing blend of design ethos, performance and affordability. It was the first motherboard to come equipped with the Thermal Armour and cover up those unsightly capacitors and now ASUS have gone even further with a motherboard that first appeared at Computex 2014 with the codename of Sabranco - Sabre(tooth) + Branco (white).

Only recently we've extolled the virtues of both the MSI Z97S Krait and ASUS X99 Deluxe for having white accoutrements but the Sabertooth takes it to a whole other level with a positively dazzling display of arctic goodness. The back is complimented by something ASUS call "TUF Fortifier technology". A reinforced backplate to you and I, but yet another indication of the seriousness with which that 'TUF' moniker is taken, especially when you discover it includes thermal pads to spread the heat away from the VRMs. Something ASUS claim reduces temperatures by up to 7°C.

ASUS TUF Sabertooth Z97 Mark S Preview     ASUS TUF Sabertooth Z97 Mark S Preview  

With such a sweep of white in every possible area it would be disappointing to water down the design ideology and so it's fantastic to see that ASUS have included PCI slot covers so that the beautiful sea of white isn't diminished by some zebra style black slots. Sure we could bemoan the fact that the plastics aren't white, but white plastic isn't known for retaining its colour whereas the Sabertooth Z97 Mark S has an innovative printing procedure which guarantees the white will remain white for the lifetime of the board. Impressive stuff.

ASUS TUF Sabertooth Z97 Mark S Preview     ASUS TUF Sabertooth Z97 Mark S Preview  

The CPU area would be the place where normally you might fear that the side is let down, after all you can hardly cover that up with plastic. Instead it gives a great demonstration of the richness of the white PCB ASUS have used. No slightly grey issues here. This is whiter than Richard Hammond's teeth, Ottawa in winter or just about everything in Tom's house.

ASUS TUF Sabertooth Z97 Mark S Preview     ASUS TUF Sabertooth Z97 Mark S Preview  

No we haven't gone crazy and shown you the same picture twice. This is part of the wealth of thermal options available on the TUF Sabertooth Mark S, vents in the power phase cooling. It's not just that either as there is the TUF Thermal Radar 2 software to tune your fans, and an onboard ICe microchip to give you the most accurate temperature monitoring possible short of having probes hanging out everywhere. 

ASUS TUF Sabertooth Z97 Mark S Preview     ASUS TUF Sabertooth Z97 Mark S Preview  

Whilst you take a moment to soak up the astounding arctic camouflage pattern let us tell you about the 10K black metallic capacitors, alloy chokes, 2 PCI Express 3.0 slots (x16 or x8/x8), SATA Express and a total of 16 USB ports split between 8 USB 3.0 and 8 USB 2.0.

ASUS TUF Sabertooth Z97 Mark S Preview     ASUS TUF Sabertooth Z97 Mark S Preview  

The only bad news is that this is an extremely limited edition. So limited that each and every one will be individually numbered, so if you want one as badly as we do then you'll have to get your order in nice and early otherwise they'll all be gone.

We think it looks amazing and if the performance is even half as good as the looks then it's a guaranteed superstar. Kudos has to go to ASUS for committing to the all-white cause so wholeheartedly. Whisper it... we prefer it to the looks of the ROG models.

Let us know what you think in the OC3D Forums.

«Prev 1 Next»

Most Recent Comments

18-11-2014, 14:41:25

GadgetGarrett
All white is all right with me. I think it looks the dog's danglers. True, a HOF 980 or an Arctic camo backplate would have to be slotted in too.

Interested to find out how limited and how much this thing will cost.

Thanks for the sneaky peek!Quote

18-11-2014, 14:49:40

MadShadow
Not quite sure where the camera is focused on the preview pic, but anyway it looks awesome!Quote

18-11-2014, 14:53:27

Permafrost
i'm not a fan of the camo style on the TA, but if i got one i want give it a paint, like i did with my Z87 one Quote

18-11-2014, 14:58:18

TPC
my biggest gripe are the brown/green connectors, grey/black would have been much betterQuote

18-11-2014, 15:01:44

Permafrost
Quote:
Originally Posted by TPC View Post
my biggest gripe are the brown/green connectors, grey/black would have been much better
agreed mate, could always cover them up with some black headers or make a blacking plate??Quote
Reply
x

Register for the OC3D Newsletter

Subscribing to the OC3D newsletter will keep you up-to-date on the latest technology reviews, competitions and goings-on at Overclock3D. We won't share your email address with ANYONE, and we will only email you with updates on site news, reviews, and competitions and you can unsubscribe easily at any time.

Simply enter your name and email address into the box below and be sure to click on the links in the confirmation emails that will arrive in your e-mail shortly after to complete the registration.

If you run into any problems, just drop us a message on the forums.