CoolerMaster MasterCase Maker 5 Review

Cooling

With 190mm of room on tap for tower type CPU coolers there’s not really much on the market that won’t fit in the Maker 5

       

 

Odds are though that you’re going to be getting things wet, if only with an AIO.  In which case you’ll be pleased to know that the Maker 5 will take 240mm or 280mm rad and fan combos up to 64mm thick in the roof, whilst at the same time accepting rads minus the fans up to 40mm thick in the front of the case.  Again, both 240mm and 280mm are on offer.

       

 

It is though a slight shame that the roof slots haven’t been a little off set to give more clearance over the motherboard.  If this had been the case the maker 5 would have been able to home some major radage up there.  As it stands though, to be honest what there is is plenty enough for all but the crazy.